Bathroom, DIY, Educational, Home Maintenance, renovation, Tips & Tricks

Tips for Caulking Your Shower Surround

Caulking your shower surround doesn’t have to be a hassle if you follow some of the easy tips below. Before you know it, you will be on your way to a beautiful, blended shower surround joint.

-Don’t use 100% industrial grade silicone caulk. It typically gives off a strong odor and requires a lot of focus and cleanup to prevent it from sticking to everything. If you must, have masking tape to frame your bead and paper towels for cleanup on hand, or use a hybrid caulk like siliconized acrylic.

-Wash the joint and surrounding surfaces with water-diluted bleach and let dry for a couple of hours before applying any caulk. This will remove and residual mildew/mold and prevent future growth.

-Use a blowdryer to heat up the old caulk before attempting to scrape it out. This will soften the caulk and make it easier to remove, which prevents scratching up the surface or joint.

-After you remove old caulk, sand the joint and surrounding surface to remove any lingering residue or texture issues. This also diminishes the need for vigorous scraping, which further preserves the surface and joint.

-After sanding, wipe down the relevant surfaces and joint one more time to remove the last of the surface level debris.

-Start from the top of the surround and work your way to the bottom when applying. This seems counterintuitive for this context, but the application angle will work better this way.

-Once you hit the mid-point of the surround, reverse starting points and start up from the bottom. The two sections of caulk should meet in the middle. This two-step application process prevents any awkward angles that could mess up your bead.


Bathroom, DIY, Fun

Extreme Makeover: Shower Edition

There’s nothing like taking a long, hot shower after a chaotic day. There’s also nothing quite like the level of revulsion you feel witnessing the lime deposit , mold, caulk & grout problems, and glass film surrounding you. No worries though, keeping your shower in tip-top, paradise shape is more low maintenance than you think. Check out some of the simple tips below!


  • Lime Buildup– It’s kind of hard to shower if the water can’t get through the valve. Clean out any pesky lime buildup easily by securing a plastic bag of vinegar to the valve overnight.  By morning your shower valve should be free of debris.
  • Old Caulk- Believe it or not, caulk and sealant can deteriorate to the point of being useless pretty fast (unless you use Red Devil’s Lifetime® sealant line of course). That means water damage and sea monsters. Okay, mainly water damage. Remember to check up on this at least yearly and remove and replace old or damaged caulk or sealant.
  • Grout Issues- There are many ways to clean and sterilize tile grout depending on the level of effort or investment you want to make. Baking soda paste, vinegar, and professional steam cleaners can do the trick. Please avoid resorting to ammonia, bleach, or hydrogen peroxide. A cleaner shower isn’t worth risking your health.
  • Shower Film- Aaaaah! Good Lord, what is that?! Oh wait. It’s just a shampoo bottle. I couldn’t tell over the crusted filth of your shower door. You might want to try lemon juice, cornstarch paste, or fabric stain remover when things get a bit too cloudy.
  • Mold- Get rid of that funky smelling nastiness by wiping down the shower a couple times a week and keeping the shower area as dry as possible.